Raspberry Pi 3 Model B+

$80.00

Quantity:

Share Product:

Product Description:

The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range.

Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
Extended 40-pin GPIO header
Full-size HDMI®
4 USB 2.0 ports
CSI camera port for connecting a Raspberry Pi camera
DSI display port for connecting a Raspberry Pi touchscreen display
4-pole stereo output and composite video port
Micro SD port for loading your operating system and storing data
5V/2.5A DC power input
Power-over-Ethernet (PoE) support (requires separate PoE HAT)

Other Products You May Like

The EV3 Medium Servo Motor is great for lower-load, higher speed applications and when faster response times and a smaller profile are needed in the robot’s design. The motor uses tacho feedback for precise control within one degree of accuracy and has a built-in rotation sensor.
  • Tacho feedback to one degree of accuracy
  • 240-250 RPM
  • Running torque of 8 N/cm (approximately 330ml/in)
  • Stall torque of 12 N/cm (approximately 500ml/in)
  • Auto-ID is built into the EV3 software
Broadcom BCM2711, 64-bit ARM Cortex-A72 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz, with a metal body for better heat dissipation. LPDDR4 SDRAM: 1GB 2 x USB3.0 Port + 2 x USB2.0 Port Expanded 40-pin GPIO Header Video/Audio Out: 4-pole 3.5mm connector; 2 x micro HDMI port, support 4Kp60 video, dual display Raw LCD (DSI) Image/Camera input: CSI port Storage: MicroSD True Gigabit Ethernet, >900 Mbps Power-over-Ethernet (PoE) support (requires separate PoE HAT) 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 5.0 and BLE (Bluetooth Low Energy) Power Requirement, 5V/3.0A via USB type C connector. Supports Raspberry Pi OS, and check 3rd party Operating System here. Dimensions: 85mm x 56mm x 17mm
Extra connectors for your EV3! Connect additional bricks, sensors and motors to your LEGO® MINDSTORMS® EV3 robotic creations! If you’ve added extra components to your original LEGO MINDSTORMS EV3 set, you’ll need these additional cables to connect them. Various lengths between 10 cm – 20 cm. 
whatsapp-color

Unlock the World of
Coding Adventures!

Login

Or

Sign Up

Or